Colliding stacks: A large deviations analysis

We analyze the performance of a prototypical scheme for shared storage allocation: two initially empty stacks evolving in a contiguous block of memory of size m. We treat the case in which the stacks are more likely to shrink than grow, but with the probabilities of insertion and deletion allowed to depend arbitrarily on stack height as a fraction of m. New results are obtained on the m → ∞ asymptotics of the stack collision time, and of the final stack heights. The results of Wentzell and Freidlin on the large deviations of Markov chains are used, and the relation of their formalism to the Hamiltonian formulation of classical mechanics is emphasized. Certain results on higher-order asymptotics follow from WKB expansions.     

动态柱形空穴膨胀模型及其在侵彻问题中的应用

 在侵彻问题中的应用进行了研究。通过采用相似变换求解塑性区控制方程，获得了动态柱形空穴膨胀中的弹塑性界面速度、径向应力分布、空穴表面应力的解。基于柱形空穴模型，推导了侵彻方程，并将其得到的预测结果与侵彻实验数据进行了比较。结果表明，模型的理论解与现有数据吻合得很好。 结果还显示了材料的可压缩性和塑性强化模量对柱形空穴膨胀以及侵彻阻力的影响。     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

动态环境约束下企业的资本积累

本文讨论动态环境约束下企业的动态投资行为,拓广了文献[4]的结果.为了使讨论的问题更符合实际情况,本文假设政府设定的污染排放上限是与企业的规模大小有关,即假设污染排放上限是生产资本的函数,讨论动态环境约束下企业的最佳动态投资行为,并为政府制定污染排放政策提供依据.     

红外动态图像生成技术概念研究

红外动态图像生成技术的基本概念包括基本术语及其定义。为了描述红外动态图像生成技术的特性,通常采用如光源类型、光谱波段、阵列规模、空间分辨率、填充因子、时间常数、帧频、闪烁、温度范围、串扰、均匀性、发射率、辐射对比度、动态范围、温度分辨率、调制传递函数、几何畸变及最大温度和最大辐射强度等概念。介绍了描述红外动态图像生成系统性能的基本概念的定义。转换器的指标定义对于转换器的设计和性能指标的测试都有重要的意义。     

低电阻测量设计实验中电位差计指针不稳的解决方法

本文分析了J33Q型电位差计在实验中指针不稳的原因,并提出了解决的办法。     

替代法测量微安表内阻的不确定度分析

在测量微安表内阻的众多方法中,替代法是最简单的方法。本文全面分析了影响测量结果不确定度的因素,求出了实验测量的最佳条件,计算了普通仪器组合下测量结果的相对不确定度。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

High temperature superconducting thin films for microwave filters

YBa₂Cu₃O_7-δ and Tl₂Ba₂CaCu₂O₈ thin films for microwave filters were synthesized by pulsed laser deposition and the two-step thalliation process. Substrate quality requirements and the relation of thin film morphology, microstructure with microwave surface resistance were discussed.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004